Description
Is The NO.4 Bolt On Side Rails The Right Choice For Me?
Bolt On side rails can save you a lot of time and money.
This Frame Includes:
- 75 ½ Long Left side rail with bolt up connect mounting plate
- 75 ½ Long Right side rail with bolt up connect mounting plate
- Connecting wire
You Can Install It In Just Minutes
This rail system includes 2 rolled steel side rails that have been specially formed and designed to use without slats on most beds. Each side is connected in the middle by a super-strong cross-wire that should keep the sides of the rails from spreading and bowing outward over time. Each end has a bolt on connection that is simple to install. Using your bolts feed them through the holes in the leg of your bed and through the universal fitting slots of steel connect endplates.
Next, slip the washer onto the end of the bolt then thread on the nut and repeat at the 2 of the connection points of the bed. Connect the center wire to the left rail and then the rights side. Finally, attach the last connection point. The last connect may have to be pulled firmly into position and again attach the last washer and nut but do not tighten the 4 connection points yet. Center the slatless rails on your headboard and footboard and then tighten all connections firmly with proper tools.
If you need Nuts and bolts Click Here for 2 1/2″ Nuts and Bolts
If you need Nuts and bolts Click Here for 4″ Nuts and Bolts
