Bed rails are an essential part of every bed and mattress set that is put together with a wood headboard and footboard. Glideaway’s DRTF-3 Hook In Steel Bed Frame Full Side Rails provide the correct fit while also lowering the bed 3 1/2 inches. Dropping the overall bed height does not compromise the durability you demand your Full or Double size bed.Description
Why would I need A DRTF-3 Hook In Steel Bed Frame Full?
- You wish to lower the height of your double or twin-size mattress set.
- If you have a wood headboard and footboard with slots and hook in connections.
- Need a heavier duty frame rail system that can support the weight of an adult.
- The side rails of your wood bed are missing or the wood side rails are broken or cracked.
Whether your new DRTF-3 hook in steel bed frame rails are for you, your spare bedroom, or your child’s room you can always count on the name Glideaway, when it comes to frame rails. This Patented slat-less design hooks into nearly any Twin or Full size hook in head board and footboard design.
The side rails are made from 1 1/2 inch wide steel angle iron allowing for complete and total support of the mattress and foundation from one end to the other alleviating the need for wood slats. The special design allows for a nice snug fit on each end and includes a center support bar with feet at the frame’s center point for strength and to eliminate sides from spreading apart.
Measurements And Fit Of The DRTF-3 Hook In Steel Bed Frame Side Rail System
Hook in rails are 77 inches in length. Once the side rails are installed the system provides an extra inch at each end of a 75 inch long full or twin size mattress. This is the perfect distance: Still easy to make and pillows won’t slide between the mattress and headboard.
Don’t need a bed that is 3 1/2 inches lower? No problem, check out the 1 CS Twin – Full Bed frame.
Check out our rolled steel (slatless) rail system for Twin or Full Beds. No.1 Hook Rails.
